Stochastic fracture mechanics using polynomial chaos

Crack propagation in metals has long been recognized as a stochastic process. As a consequence, crack propagation rates have been modeled as random variables or as random processes of the continuous. On the other hand, polynomial chaos is a known powerful tool to represent general second order random variables or processes. Hence, it is natural to use polynomial chaos to represent random crack propagation data: nevertheless, no such application has been found in the published literature. In the present article, the large replicate experimental results of Virkler et al. and Ghonem and Dore are used to illustrate how polynomial chaos can be used to obtain accurate representations of random crack propagation data. Hermite polynomials indexed in stationary Gaussian stochastic processes are used to represent the logarithm of crack propagation rates as a function of the logarithm of stress intensity factor ranges. As a result, crack propagation rates become log-normally distributed, as observed from experimental data. The Karhunen–Loève expansion is used to represent the Gaussian process in the polynomial chaos basis. The analytical polynomial chaos representations derived herein are shown to be very accurate, and can be employed in predicting the reliability of structural components subject to fatigue.     

Match-up approaches to a dynamic rescheduling problem

This article considers the problem of inserting arriving jobs into an existing schedule of a real world manufacturer. A number of match-up strategies, which collect the idle time on machines of a current schedule for the insertion of new jobs, are proposed. Their aim is to obtain new schedules with a good performance which are at the same time highly stable, meaning that they resemble as closely as possible the initial schedule. Basic rescheduling strategies such as ‘total rescheduling’, ‘right shift’ and ‘insertion in the end’ deliver either good performance or stability, but not both. Contrarily, our experimentation and statistical analysis reveal that the proposed match-up strategies deliver high performing schedules with a high stability. An analysis of the problem parameters that determine the behaviour of the proposed match-up algorithms is included in this article.     

Multi-objective two-sided mixed-model assembly line balancing using particle swarm optimisation with negative knowledge

Particle swarm optimisation (PSO) is an evolutionary metaheuristic inspired by the swarming behaviour observed in flocks of birds. The applications of PSO to solve multi-objective discrete optimisation problems are not widespread. This paper presents a PSO algorithm with negative knowledge (PSONK) to solve multi-objective two-sided mixed-model assembly line balancing problems. Instead of modelling the positions of particles in an absolute manner as in traditional PSO, PSONK employs the knowledge of the relative positions of different particles in generating new solutions. The knowledge of the poor solutions is also utilised to avoid the pairs of adjacent tasks appearing in the poor solutions from being selected as part of new solution strings in the next generation. Much of the effective concept of Pareto optimality is exercised to allow the conflicting objectives to be optimised simultaneously. Experimental results clearly show that PSONK is a competitive and promising algorithm. In addition, when a local search scheme (2-Opt) is embedded into PSONK (called M-PSONK), improved Pareto frontiers (compared to those of PSONK) are attained, but longer computation times are required.     

Process optimisation and physicochemical characterisation of enzymatic hydrolysates of proteins from co‐products of Atlantic Salmon (Salmo salar) and Yellowtail Kingfish (Seriola lalandi)

The aim of this study was to develop an enzymatic hydrolysis process of protein co‐products for two major commercial fish species in Australia: Atlantic salmon (AS) and Yellowtail kingfish (YTK). The outcomes are to produce high protein recovery of fish protein hydrolysates within controlled molecular weight ranges that display enhanced physicochemical properties of oil binding and emulsification. Three enzymes (Flavourzyme, Neutrase and Alcalase) were applied to processing co‐products. Protein recovery and physicochemical properties were evaluated with increasing hydrolysis time from 30 min to 180 min and ratio of enzyme to substrate (E/S) from 0.5% to 3.0%. In order to achieve a product with optimum emulsifying capacity (50 ± 0.6 m² g^?1), an E/S ratio of 0.6–1.3% Flavourzyme was applied for 30–111 min with a protein recovery of 55%; in order to achieve a product with optimum oil‐binding capacity (8.3 ± 0.3 g oil g hydrolysates^?1), an E/S ratio of 2.3–3.0% Flavourzyme was applied for 25–64 min with a protein recovery of 70%. YTK protein hydrolysates were further membrane‐fractionated into five fractions (>100 kDa, 50–100 kDa, 30–50 kDa, 10–30 kDa and <10 kDa), and of these, the 10–30 kDa exhibited the best properties of oil binding (19 ± 0.3 g oil g hydrolysates^?1) and emulsification (57 ± 0.7 m² g^?1). These results demonstrate the importance of enzymatic hydrolysis of seafood co‐products into high‐value ingredients for food products and processing.     

Comparison of sterol composition between Tuber fermentation mycelia and natural fruiting bodies

Truffle, belonging to Tuber genera, is a nutritious and sterol-rich edible fungus, and sterol is a potential health beneficial compound. A comparison of Tuber sterol composition indicates that the total sterol contents in the fermentation mycelia (i.e., 10.5 mg g⁻¹) (n = 3) were approximately 3.2-5.6 times higher than that of the fruiting bodies (p < 0.05) with the addition of soybean flour into the basal fermentation media. Moreover, the phytosterol profile of fermentation mycelia could be significantly improved by adding soybean flour into the fermentation media. After the addition of soybean flour, stigmasterol and β-sitosterol appeared in the fermentation mycelia and the contents of total phytosterols (2279 μg g⁻¹) (n = 3), brassicasterol (943 μg g⁻¹) (n = 3), and campesterol (418 μg g⁻¹) (n = 3) were all increased significantly (p < 0.05). Moreover, the total contents of sterols and phytosterols in the fermentation mycelia cultured in the soybean media were much higher than those in the fruiting bodies (i.e., 1883-3240 and 479-1832 μg g⁻¹, respectively) (n = 3, p < 0.05). This work confirms the potentiality of Tuber fermentation mycelia as the alternative resource for its fruiting bodies from the viewpoint of sterols production.     

Optimised design of energy efficient building façades via Evolutionary Neural Networks

Buildings are required to be more and more energy efficient, in order to comply with restrictive requirements of building regulations and energy certifications. Optimisation algorithms have shown to be effective in identifying good solutions for the design of efficient building services. In this article Evolutionary Neural Network Design (ENN-Design) has been adopted to drive the design of a typical façade module for an office building. This application is significant, since façades play a major role in the definition of the energy performance of buildings. Both single-objective and multi-objective optimisations have been carried out. The aim of the article is to introduce an innovative approach for improving the performance of building envelopes by means of a reasonable amount of calculation time.     

基于混沌粒子群优化算法的NOMA功率分配研究

非正交多址接入(NOMA)技术使多个用户共享一个时频资源块,显著地提高了频谱利用率,已成为5G多址技术的研究热点。针对NOMA系统能量效率最大化问题,对非正交多址接入技术中功率分配进行了研究,提出了基于混沌粒子群优化算法的NOMA功率分配方案。建立了能量效率最大化的NOMA优化模型,利用混沌粒子群优化算法对系统功率进行分配,使NOMA系统的能量效率得到优化。仿真结果表明,当发射功率为36 dBm时,系统能量效率最大,且与传统粒子群算法相比所需迭代次数更少,获得的能量效率更优。     

Experimental investigation and optimisation in drilling of GFRP composites

Glass fibre-reinforced polymer (GFRP) composite materials are one of the important materials and are economic alternative to engineering materials because of their superior properties. This paper presents an effective approach for the optimisation of drilling parameters with multiple performance characteristics based on the Tagugch’s method with grey relational analysis. Taguchi’s L₁₆, 4-level orthogonal array has been used for the experimentation. The drilling parameters such as spindle speed and feed rate are optimised with consideration of multiple performance characteristics, such as thrust force, workpiece surface roughness and delamination factor. Response table and response graph are used for the analysis. The analysis of grey relational grade indicates that feed rate is the more influential parameter than spindle speed. The results indicate that the performance of drilling process can be improved effectively through this approach.     

Global supply chain planning for pharmaceuticals

The shortening of patent life periods, generic competition and public health policies, among other factors, have changed the operating context of the pharmaceutical industry. In this work we address a dynamic allocation/planning problem that optimises the global supply chain planning of a pharmaceutical company, from production stages at primary and secondary sites to product distribution to markets. The model explores different production and distribution costs and tax rates at different locations in order to maximise the company's net profit value (NPV).Large instances of the model are not solvable in realistic time scales, so two decomposition algorithms were developed. In the first method, the supply chain is decomposed into independent primary and secondary subproblems, and each of them is optimised separately. The second algorithm is a temporal decomposition, where the main problem is separated into several independent subproblems, one per each time period. These algorithms enable the solution of large instances of the problem in reasonable time with good quality results.     

Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process

A 3D print device using a cold metal transfer arc welding station to melt a metallic filler wire is developed to build aluminium part by optimising the process parameters. First tests achieved using standard pre-recorded process parameters allow to study the effect of the travel speed and the average welding power on the geometrical characteristics of mono-layer deposits and on walls built by layers superposition. Finally, a parametric study of the effect of each process parameter controlling the shape of the arc current or voltage and the filler wire feeding is carried out in order to try to improve the geometrical regularity of the deposits, and to better understand the effect of each parameter on the melting of the filler wire, its transfer on the support plate, and the geometry of the formed bead.